PLATING PROCESS
1. Pour a small amount of the pen plating solution into a 30
ml beaker or you may use the cap from the solution bottle.
2. Attach the clean piece of jewelry to the (-) lead. Plug the
pen into the positive outlet on the rectifier. If using a
disposable pen, follow instruction for pen plating with
disposable plater.
3. Use at room temperature.
4. Place the felt tip of the plating pen into the plating
solution for 1-2 minutes.
5. Turn on the rectifier and set at 4 volts.
6. Take the pen in hand and place the felt tip onto the piece
to be plated.
7. Slowly move the felt tip back and forth over the area that
you wish to pen plate. The pen tip should not be dripping
solution onto the piece, so please shake off all excess
solution that was not absorbed into the felt tip. The back
and forth motion may have to be repeated several times
before the desired results are achieved.
8. Be sure to rinse off the piece under hot tap water
immediately after pen plating. Do not rinse the piece off
until the desired results are achieved.
9. Return all solution to the original bottle for safe storage.
Home| About Us| My Account | Help |Gift Certificate | COVID19 | On Sale! 
Tools & Machinery