Home > Tools & Machinery > Benches & Bench Tools > Stone Setting Tools >

Make your own Claw Setting Jig Set of 9
Make your own Claw Setting Jig Set of 9
 

Our Price:$57.95


Product Code: 410785
Qty:

Description Instructions
 
Make wire settings with 4 to 8 prongs in 5 different sizes with this set of fixtures. Equal lengths of wire are placed in the slots of one of the setting cones and then joined together with solder.
The Claw Setting Set consists of the following: • (1) Round steel base with a mounting column • (3) Tapered jigs • (4) Steel tubular sleeves 1. Select the tapered jig you wish to use (4, 6, or 8 prongs). 2. Install this jig into the mounting column of the base. 3. Install the appropriate tubular sleeve over the jig. It is this sleeve that will hold the prongs in position to be soldered, so you need to be sure that the wire you will be using will fit between the jig and the sleeve. 4. Cut wire to equal lengths and in the quantity required. A tube cutting jig is useful for this purpose. Be sure to de-bur the ends of these wires. 5. One-by-one, insert these wires between the sleeve and the jig. The wires are now ready to be soldered together. Soldering will be easier if you pre-heat the claw setting jig.